Sharp 10.7GHz Twin Output LNBF


Sharp 10.7GHz Twin Output LNBF


Sharp 10.7GHz Twin Output LNBF

Foxtel Approved.
Suitable for VAST & Foxtel

Receiving Frequency Range 11.70 – 12.75 GHz
Output Frequency Range 1000 – 2050 MHz
Local Oscillator Frequency 10.7 GHz
Noise Figure* < 0.8 dB @ 25 ºC (0.7 dB typical)
Conversion Gain 53 – 62 dB @ 25ºC
Gain Frequency Characteristic <6 dBpp (11.7 – 12.75 GHz)
±1 dBpp within any 54 MHz segment
Gain difference (H – V pol) < 6.0 dB
1dB Output Gain Compression 0 dBm min
L. O. Frequency Range 10.699 – 10.701 GHz
Temperature drift ±2 MHz over -20ºC – +50ºC
L.O. Phase Noise -55 dBc/Hz @ 1 kHz offset
-80 dBc/Hz @ 10 kHz offset
-100 dBc/Hz @ 100 kHz offset
L.O. Spurious at Signal Input -60 dBm max
Image interference suppression ratio 45 dB min
Non-harmonic Related Spurious -40 dBc (>10 kHz)
Harmonic Related Spurious -35 dBc (2 – 10 kHz)
3rd Order Inter-Modulation -40 dBc (-6 dBm at output level)
Cross-Polar Discrimination 25 dB min
Operating Temperature -30º to +60ºC
Clamp Diameter 40 mm
Output VSWR < 2.5 : 1
Output Connector 4 x F-type female
Output Impedance 75 ohm
Control Voltages 11.5 – 14.0 V Vertical Polarization
16.0 – 19.0 V Horizontal Polarisation
Current consumption 42 mA typ. at 18V, 64mA typ. at 13V



Knowledge. Call us up and the staff that answers the phone can answer your question! Our technicians have many years of experience in the satellite tvro industry.  We also offer honest advice without any hard sell.  We’re all West Australians and familiar with Western Australian towns and locations.

Track Record. We’ve been around for more than 20 years and intend to stay on. So you’ll know if you have any problems later down the track, we’ll still be here to help! Have a look at our website and you’ll see we still carry spare parts for receivers we sold 10 years ago.

Service. Place an order before 3pm and we’ll dispatch same day! We have dedicated dispatch staff so you’ll be sure your order will leave without delay.

Additional information

Weight .3 kg