Wi-Tek WI-AP218AX-Lite WIFI 6 Access Point


SKU: 202303 Category:


Wi-Tek WI-AP218AX-Lite WIFI 6 Ceiling Mounted Access Point

WI-AP218AX-Lite is a high-performance Wi-Fi 6 AP for indoor large-area Wi-Fi coverage scenarios. The device supports 802.3af PoE and a 12V DC local power supply. The dual LAN ports design  facilitates the expansion of network devices to meet the needs of more networking scenarios. Compliant with 802.11a/b/g/n/ac/ax Wi-Fi protocol, WI-AP218AX-Lite supports MU-MIMO dual-stream technology and offers built-in omnidirectional antennas. It can operate concurrently at 2.4GHz and 5GHz, providing high-speed wireless access of 574Mbps at 2.4GHz, 1201Mbps at 5GHz, and up to  775Mbps per AP. It has long-range coverage, making it ideal for many wireless scenarios,, especially in offices, shopping malls, hotels, service scenarios, etc


  • 1800Mbps Wireless Ceiling Mount Access Point
  • 2 Gigabit Ethernet ports
  • 574Mbps at 2.4GHz + 1201Mbps at 5GHz
  • Support fast roaming technology
  • Support Fit/Fat working mode
  • Support AP controller and cloud management

Ultra-Fast Wi-Fi 6 Speeds
WI-AP218AX-Lite up to 1775Mbps high-speed wireless access.

High-Efficiency Wi-Fi 6
By introducing new technologies such as OFDMA, upstreamMU-MIMO, BSS Coloring, and TWT, the system has greatly improved its performance. Compared with Wi-Fi 5, it has four times more bandwidth and concurrent users, with lower latency and more energy saving.

Cloud Management
Users can conduct the comprehensive remote operation, management, and maintenance of the entire network equipment through the Wi-Tek cloud platform, and can also share the network with  ther for network hosting and collaborative management, to operate and maintain the enterprise network more efficiently.

Multiple Power Supply Methods
Supports 802.3af PoE and 12V DC local power. you can use Ethernet cables to transfer both electrical power and network data, making deployment more flexible and removing the need to install additional power cabling.

Fast Roaming
802.11kvr fast roaming provides fast switching to the access point with the optimal signal when moving between APs.

Support Fit AP and Fat AP Mode
The device supports both Fit AP and Fat AP mode. A wireless network can be formed with multiple APs, or it can be used as a wireless router when deployed independently. The device offers more flexible configurations, more abundant application features, and more extensive applicable scenarios.


Products WI-AP218AX-Lite
Hardware Specifications
Wireless Standards IEEE 802.11ax/ac wave2/wave1/n/b/g/a
Operating Bands 2.4GHz & 5GHz
Antenna 2.4Ghz:4.6dBi, 5GHz: 4dBi
Spatial Streams 2.4GHz:2×2 MIMO, 5GHz:2×2 MIMO
Signal Rate: Up to 574Mbps at 2.4GHz, Up to 1201Mbps at 5GHz
Receiver Sensitivity
802.11b: -85dBm@11M -92dBm@1M
802.11g: -72dBm@54M -90dBm@6M
802.11n HT20: -70dBm@MCS7 -88dBm@MCS0
802.11n HT40: -68dBm@MCS7 -86dBm@MCS0
802.11ax HT20:-60dBm@MCS11 -85dBm@MCS0
802.11ax HT40: -56dBm@MCS11 -85dBm@MCS0
802.11a: -72dBm@54M -92dBm@6M
802.11n HT20: -70dBm@MCS7 -90dBm@MCS0
802.11n HT40: -68dBm@MCS7 -88dBm@MCS0
802.11ac HT20: -70dBm@MCS7 -90dBm@MCS0
802.11ac HT40: -68dBm@MCS7 -88dBm@MCS0
802.11ac HT80: -58dBm@MCS9 -85dBm@MCS0
802.11ax HT20: -62dBm@MCS11 -88dBm@MCS0
802.11ax HT40: -58dBm@MCS11 -86dBm@MCS0
802.11ax HT80: -55dBm@MCS11 -84dBm@MCS0
Maximum Transmit Power <22dBm
Interface: (2)10/100/1000M Base-T Ethernet ports
Power Supply: DC 12V/1.5A (Not Included), 802.3af PoE Supported, Power Consumption < 15W
Installation: Wall/Ceiling Mounting
External Buttons: reset button (long press for 8 seconds to restore the factory default configuration)
Dimensions 188mm * 188mm * 50mm
Operating Temperature:-20°C ~ 45°C
Storage Temperature:-40°C ~ 70°C;
Operating Humidity: 5% ~ 95% (non-condensing)
Storage Humidity: 5% ~ 95% (non-condensing)
Operating Mode Fit AP, Fat AP
Wireless Function: Up to 16 SSIDs, Support SSID hiding, Enable/Disable Wireless Radio, Manual and automatic channel assignment, Manual and automatic bandwidth assignment, TxPower control
Roaming:  Support Layer 2 roaming
Wireless Security: Captive portal authentication, Static blacklist and whitelist, Wireless isolation between clients, SSID to VLAN mapping, Support 802.1X,  WPA/WPA2/PSK/WPA/WPA2-Enterprise/WPA3
Internet Connection Type: Support static IP, DHCP, PPPoE Dial-Up
Support local management with web
Support centralized management with AC
Support remote management with the Wi-Tek cloud platform
Platform Management Features Automatic RF adjustment via the platform, Unified configuration via the platform, Unified monitoring via the platform

Additional information

Weight 3 kg