Resi-Linx RL-RF380 RF Video Distribution Unit with IR control
The RL-RF380’s patented design is for whole-house video distribution with IR control. The splitters have reverse path IR control, that when combined with other products in the IR range, will allow you to control the AV inputs from other locations. The RL-RF380/CS-VDU38IR must be remotely powered by an IR Modulator when using the IR Control.
Active, low loss combiner and splitter with 3 inputs, 8 outputs
Includes gain control for Free To Air input to eliminate problems due to high/low signal strength. When combined with gain control on modulator, allows complete balancing of signals
FM trap On/Off switch to filter 88-108MHz signals from transferring through to output ports to eliminate FM interference to TV reception
Designed for mounting into any Structured Cabling Enclosure
Output Connection(s): 8
Input Connection(s): 3 (Modulator / ANT)
Power Input: 110-240V AC
Power Output: 12V DC – 1.5A Switch Mode
Power Output Connection: 1.8m Length with F-2.1mm Jack
Power Requirement: 12V DC Power Supply
Output Frequency Pass: 30KHz to 850MHz
Gain / Loss: ANT +2dB / Modulator +3dB
Output Run Distance: 60 metres
Isolation (Modulator inputs to ANT): -80dB
WHY BUY FROM US?
Knowledge. Call us up and the staff that answers the phone can answer your question! Sciteq technicians have many years of experience in the satellite tvro industry. We also offer honest advice without any hard sell. We’re all West Australians and familiar with Western Australian towns and locations.
Track Record. We’ve been around for more than 20 years and intend to stay on. So you’ll know if you have any problems later down the track, we’ll still be here to help! Have a look at our website and you’ll see we still carry spare parts for receivers we sold 10 years ago.
Service. Place an order before 3pm and we’ll dispatch same day! We have dedicated dispatch staff so you’ll be sure your order will leave without delay.