Telecom Splice UTP connectors Red 3 wire 100pk

$30.00

Description

Telecom Splice UTP connectors Red 3 Wire

Telecom Splice UTP connectors Red 3 wire 100pk are specifically designed to quickly connect two or three Telecom conductors.  Simply insert the unstripped wires, and crimp the cap of the connector using the correct crimping tool (Part No. TELSP2), and the wires are connected forever. These connectors are commonly referred to as “Scotch Locks”

Telecom Splice Connector Features
• Connectors are grease filled to ensure a moisture proof connection
• Bodies are made from polycarbonate plastic that resists splitting, rough handling and solvents

 

Instructions

The connection method is an IDC (Insulation Displacement Connection), which is proven to be stable in the long term. Two IDC elements are used in each connection for greater
joint integrity.

Note: Ensure any crimp tool used has a parallel action, like the TELSP2 tool. Many low cost tools have a plier action, which is not recommended for crimping these connectors.

 

Technical Data

Specifications
The UR Connector accepts two or three solid copper conductors for butt splicing.
The connector is filled with sealant to provide moisture resistance.
Max insulation diameter (mm): 1.67
Cable style and wire diameter (mm):
Full plastic (unfilling): 0.4-0.9
Full plastic (filling): 0.4-0.9

Mechanical Performance
Plastic Housing: PC (UL 94v-0)
Contacts: Phosphor Bronze
Wire Insertion Force: 45N Typical
Wire Pull out Force: 40N Typical
Use Times: >100

Environment Characteristics
Storage Temperature Range: -40 ºC ~ +120 ºC
Operating Temperature Range: -30 ºC ~ +80 ºC
Relative Humidity: <90% (at 20 ºC)
Atmospheric Pressure: 70KPa ~106KPa

Electrical Performance
Insulation Resistance: R ≥ 1000M Ohm
Contact Resistance: R ≤ 5m ohm
Dielectric Strength: 1200V DC 60s
can’t spark over and do not have fly arc
Constant Current: 5KA 8/20u Sec
Surge Current: 10KA 8/20u Sec

 

WHY BUY FROM US?

Knowledge. Call us up and the staff that answers the phone can answer your question! Sciteq technicians have many years of experience in the satellite tvro industry.  We also offer honest advice without any hard sell.  We’re all West Australians and familiar with Western Australian towns and locations.

Track Record. We’ve been around for more than 20 years and intend to stay on. So you’ll know if you have any problems later down the track, we’ll still be here to help! Have a look at our website and you’ll see we still carry spare parts for receivers we sold 10 years ago.

Service. Place an order before 3pm and we’ll dispatch same day! We have dedicated dispatch staff so you’ll be sure your order will leave without delay.

Additional information

Weight 0.05 kg