4 Way MATV Indoor Tap 5-2400MHz (Various dB)


SKU: N/A Category: Tags: , , ,


MATV Indoor Tap 4 Way 5-2400MHz Power Passing


75mm x 35mm x 25mm

RF Taps are commonly used in commercial or complex RF distribution networks. Where a splitter splits the signal evenly, a tap splits the signal unevenly.

For example: A 10 storey hotel has antenna mounted on the roof  the antenna signal runs down a riser and splits off at each floor. If a standard splitter were used at the top floor then half of the signal would go to level 10, while half of the signal goes on to floors 1-9. This is not a desirable situation and would lead to an unbalanced system where the signal levels on floor 10 would be high and the signal levels on floor 1 would be low. In this situation a tap would be used. In this example, the OUT port would continue down the riser, and the TAP port would be used for each floor. In the 10 floor hotel, a higher tap rating (ie 25dB) would be used at the top and lower tap ratings (ie 5dB) used for the lower floor

506410 Ikusi UDL-410 10dB 4 Way Tap

506412 Digitek 11C412 12dB 4 Way Tap

506415  Ikusi UDL-415 15dB 4 Way Tap

506420  Ikusi UDL-420 20dB 4 Way Tap

506424  Digitek 11C424 24dB 4 Way Tap

Additional information

Weight 0.02 kg
Tap dB

10dB, 12dB, 15dB, 20dB, 24dB